Smart Technologies SMART Board 2000 series, User Manual, Page: 24 / 60

CHAPTER 2
GETTING STARTED WITH THE DISPLAY
16 smarttech.com/kb/171178
Updating system software
When the SMART Board 2000 series display is connected to the Internet, it updates the system
software automatically.
When a system software update is available, the display downloads the update in the background
then waits for four hours of inactivity. When that happens, the display shows a two-minute
countdown before beginning the update. The countdown can be interrupted at any time. The
update begins when the countdown finishes. The display shows a blank screen for four minutes.
When the update is complete, the display shows content that was on it before the update.
NOTE
You can configure your organization’s network to allow or prevent automatic system software
updates (see connecting-to-a-network.htm).
Applying an automatic system software update manually
If the display has downloaded the system software update but hasn’t yet applied the update, you
can start the update process manually from Settings.
To apply an automatic system software update manually
1. On the remote, press
Input button to open the launcher.
The launcher appears.
2. Select
Settings and press OK .
3. Scroll to Auto Update .
4. Under Check for Updates Now , tap Apply Update Now .
Updating system software manually
You can download system software updates at smarttech.com/downloads and update your display
using a USB drive.