Smart Technologies SMART Audio 340 System Administrator'S And User'S Manual Download Page 36

Page: 36 / 58

You can use your SMART Audio system once you install it without any special settings.

However, a system administrator can install and use SMART Audio configuration software to

customize settings to meet requirements and to improve your audio experience.

I M P O R T A N T

Do not install SMART Audio configuration software on teacher computers unless you want to give

them access to the configuration settings.

Teachers should access SMART Audio software from the

Start

menu (Windows computers) or the

Dock

(Mac computers) or from SMART Notebook software.

Installing SMART Audio configuration software

Install SMART Audio configuration software from the included CD, or go to the download page

(

smarttech.com/downloads

I M P O R T A N T

You require a computer with a Windows operating system to install and run SMART Audio

configuration software. After you configure your SMART Audio system, you can download the

configuration file to your control unit, and then copy the settings in SMART Audio software from a

computer with either a Windows operating system or a Mac operating system software.

To install SMART Audio configuration software

1. Disconnect the USB cable that connects your Windows computer to your control unit.

2. Insert the included CD in your computer, and then browse to the

SMARTAudioConfigSetup.exe

file.

You can also go to the administrator downloads page

(

smarttech.com/AdministratorDownloads

), select

SMART Audio Configuration software

and then download the

SMARTAudioConfigSetup.exe

file to your desktop.

3. Double-click the

SMARTAudioConfigSetup.exe

file, and then follow the on-screen

instructions.

C H A P T E R 5

Customizing your settings

Summary of Contents for SMART Audio 340



























































Search results

Summary of Contents for SMART Audio 340

Reviews:

Related manuals for SMART Audio 340

Brands by name

Popular brands

Smart Technologies SMART Audio 340, System Administrator'S And User'S Manual

Search results

Summary of Contents for SMART Audio 340

Reviews:

Related manuals for SMART Audio 340

Brands by name

Popular brands