Smart Technologies SMART Audio 340 System Administrator'S And User'S Manual Download Page 32

Page: 32 / 58

T I P

You can also adjust the volume of inputs at the input source. To adjust the input from the

SMART Audio system microphone, see

Controlling an auxiliary audio input device from your

microphone

on page 17.

To adjust the volume of an auxiliary audio input device

1. Press the

SMART Audio

icon

on the SMART Notebook software toolbar.

SMART Audio software appears.

2. Slide the input’s volume slider up or down for the input.

To mute an auxiliary audio input device

Start SMART Audio software, and then press the un-muted speaker icon

below the input

volume slider.

To restore an auxiliary audio input device’s volume

Start SMART Audio software, and then press the muted speaker icon

below the input

volume slider.

Adjusting the speaker tone

The SMART Audio system enables you to adjust the brightness of the speaker tone.

To adjust the brightness of the speaker tone

1. Press the

SMART Audio

icon

on the SMART Notebook software toolbar.

SMART Audio software appears.

2. Locate the

Speaker Tone

area.

3. Press

High

Medium

Low

Checking your microphone battery level

You can use SMART Audio software to check your microphone battery level.

N O T E

If your microphone battery level is below 10%, the microphone status light flashes red. For more

information, see

Troubleshooting using the microphone status light

on page 47.

C H A P T E R 4

Using SMART Notebook software to change your settings

Summary of Contents for SMART Audio 340



























































Search results

Summary of Contents for SMART Audio 340

Reviews:

Related manuals for SMART Audio 340

Brands by name

Popular brands

Smart Technologies SMART Audio 340, System Administrator'S And User'S Manual

Search results

Summary of Contents for SMART Audio 340

Reviews:

Related manuals for SMART Audio 340

Brands by name

Popular brands