Smart Technologies Board 8084i-G4, Administrator'S Manual

Page: 41 / 96

CHAPTER 5
REMOTELY MANAGING THE ROOM SYSTEM
35 smarttech.com/kb/170819
To connect to your room system using DameWare
1. Start DameWare.
2. Click
Connect
.
The
Remote Connect
window opens.
3. Type the IP address for the room system in the
Host
box.
4. Type admin in the
User ID
box.
5. In the
Password
box, type the Intel AMT password you specified in
To configure Intel AMT
on
page 33.
6. Select
Use Intel AVT KVM
.
7. Click
Connect
.
8. Press F1, and then press ENTER to select the room system display you want to view.
NOTE
If you want to view a different display, you must disconnect from the room system and then
connect to it again.
To connect to your room system using VNC Viewer Plus
1. Start VNC Viewer Plus.
2. Select
None
in the
Encryption
drop-down list.
3. Select
Intel® AVT KVM
in the
Connection Mode
drop-down list.
4. Click
Connect
.
5. When prompted, type the Intel AMT user name (
admin
) and password you specified in
To
configure Intel AMT
on page 33.
6. Press F1, and then press ENTER to select the room system display you want to view.
Security
Intel AMT remote communications are secured by TLS, which is a protocol that secures and
authenticates communications across a public network. For more information, see
References
on
page 40.