CHAPTER 1
WELCOME
7
smarttech.com/kb/170819
Wall stand kit
The wall stand kit includes a wall stand for each interactive flat panel in
the room system and the cable raceway. The wall stand transfers some
of the weight from the wall to the floor and is required for metal stud
walls that can’t support the full weight of the interactive flat panel. The
cable raceway covers cables running across the floor from the
interactive flat panels to the meeting room table.
Comparing room sizes
The SMART Room System comes in six sizes. This section presents the key differences among
these sizes.
Extra small room (SRS-LYNC-XS)
Intended use:
Extra small meeting rooms
(approximately four people)
100 sq. ft. (9 m²)
Display type:
One SMART Board 8055i-G5
interactive flat panel
Display size (diagonal):
54 1/2" (138.4 cm)
Optional wall stand kit:
WSK-SINGLE
Small room (SRS-LYNC-S-G5)
Intended use:
Small meeting rooms
(approximately six people)
150 sq. ft. (14 m²)
Display type:
One SMART Board 8065i-G5
interactive flat panel
Display size (diagonal):
64 1/2" (163.9 cm)
Optional wall stand kit:
WSK-SINGLE
