CHAPTER 1
WELCOME
6
smarttech.com/kb/170819
Video connection harness
Users can connect the video connection harness’s HDMI® cable or VGA cable to a computer to
display the computer’s video output on an interactive flat panel and share it with remote
participants.
The connectors for the video connection harness are typically located on the meeting room table.
SMART Room System USB Bridge
When combined with the video connection harness, the SMART Room System USB Bridge
enables users to connect laptops or a room computer to the room system. When users connect the
SMART Room System USB Bridge to a computer, they can interact with the computer by touching
the interactive flat panel’s surface.
SMART recommends that all users install the latest versions of SMART Meeting Pro® PE software,
SMART Ink™ and SMART Product Drivers on any computer or laptop that will be used to connect to
the SMART Room System using the SMART Room System USB Bridge. Visit
to download the latest SMART software versions and refer to the
SMART Room System with Skype for Business User’s Guide
) for full
instructions on how to install all of the software for the SMART Room System USB Bridge.
The SMART Room System USB Bridge’s connector is typically located on the meeting room table.
Accessories
Optional accessories for the SMART Room System include the following:
l
Additional table microphones
l
Wall stand kit
NOTE
For accessory part numbers and ordering information, refer to the specifications (see
Additional table microphones
The room system includes two table microphones. Your organization can
purchase and connect up to three additional table microphones for each room
system if needed for a total of up to five table microphones.
