APPENDIX A
-
USING THE LYNC ADMIN CONSOLE AND SMART SETTINGS
80
smarttech.com/kb/170450
6. If you want to apply your changes, press Apply & Restart.
OR
If you don’t want to apply your changes, press Undo & Restart.
The Lync appliance restarts in meeting mode.
Lync Admin Console controls
Control
Procedure
Notes (if any)
Lync Settings
Credentials
User Name
Type the Lync account’s full domain name in
one of two formats depending on how your
organization’s servers are configured
(for example, yourdomain\room1 or
[email protected]).
You can record this information in the
SMART Room System for Microsoft Lync
software configuration guide.
SIP URI
Type the Lync account’s SIP URI (for example,
[email protected]).
You can record this information in the
SMART Room System for Microsoft Lync
software configuration guide.
If the domain name used in the Lync
account’s SIP URI is different from the
domain name on the Lync Web Service
certificate, see
Password
Type the Lync account’s password.
You can record this information in the
SMART Room System for Microsoft Lync
software configuration guide.
Proxy Credentials
None
Select to not specify credentials for proxy
authentication.
SMART recommends that you use the
Lync account credentials for proxy
authentication.
User Lync Account
credentials
Select to use the Lync account credentials you
provided in the
Credentials section for proxy
authentication.
Other credentials
Select to use other credentials for proxy
authentication.
Type the user name in the
User name box and
the password in the
Password box.
Configuration Modes
Automatic
Select if your organization’s autodiscover DNS
records are set to automatically link to the Lync
2013 server pool.
