SMART Embedded Computing PCIE-7217, Installation And Use Manual

Page: 98 / 108

98 PCIE-7217 Installation and Use (6806873A01B)
Software
Software
6.2.2.1 Query Command
Using the query command, FCU returns firmware information for a specific device (if used
with
-d
) or information about all firmware devices. The following code fragment shows a
sample output.
[root@pcie7217-s8-c1 ~]# fcu -q
********************[[[[[REPORT BEGIN]]]]]********************
Operation: Query
Product Name: PCIE-7217
#00 Device : pcie7217-cpld
Bank #0 - Active Version: 00.01.04
#01 Device : pcie7217-cpu
Bank #0 - Active Version: 0.1.00000006
********************[[[[[ REPORT END ]]]]]********************
6.2.2.2 Show Command
The show command does not access any device. It only operates with the firmware image
and it shows the metadata, which is part of the image. Furthermore, it validates the
firmware image to compare the checksum part of the metadata against the checksum of
the raw image. The output of the show operation is similar to the output of the query
operation. A sample output of the BIOS image is shown below.
[root@pcie7217-s8-c1 ~]# fcu -sf pcie7217-cpu-0.1.6.fri
********************[[[[[REPORT BEGIN]]]]]********************
Operation: Show
Manufacturer : ARTESYN
Board : pcie7217
#00 Device : pcie7217-cpu
Bank #0 - Version: 0.1.00000006
#01 Device : pcie7217-cpu
Bank #0 - Version: 0.1.00000006
********************[[[[[ REPORT END ]]]]]********************
The BIOS image has two images inside, the upper is for the first CPU and the other is for
the second CPU.