SMART Embedded Computing PCIE-7217, Installation And Use Manual

Page: 80 / 108

80 PCIE-7217 Installation and Use (6806873A01B)
BIOS
BIOS
To select an item, use the arrow keys to move the cursor to the desired field and then use
the plus (+) and minus (-) value keys to select a value for that field. Use the Save Change
Without Exit command in the
Exit
menu to save the values currently displayed in all the
menus.
To display a submenu, use the arrow keys to move the cursor to the desired submenu and
then press <Enter> .
5.2.3 Field Help
The help text of the selected field is displayed on the right side of the screen. By scrolling
through each field, the related help text of the active selection is displayed.
Caution
Incorrect settings can cause the system to malfunction. To correct mistakes, use the
<F2>
key to return to setup and restore the system defaults by pressing
<F9>
.
Alternatively you can press
<F2>
to return to the BIOS setup and go to the Exit menu
and select Load Setup Defaults.
Table 5-2 Legend Keys
Key Function
F1 Displays general help window
Esc
Exits the menu or the BIOS Setup program without saving any
changes
Left and Right Arrow Keys Selects a different menu (moves the cursor left or right)
Up and Down Arrow Keys Select an item (moves cursor up and down)
F5 or F6 Change values
Enter Executes command or selects a submenu
F9 Loads the defaults configuration values for this menu
F10 Saves the changes and exits
PgUp or PgDn Moves cursor to next or previous page