SMART Embedded Computing COMX-CORE-2610-ET, Installation And Use Manual

Page: 76 / 92

76 COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS
Advance Menu
VCORE Showing VCORE Voltage
5V Showing 5V Voltage
1.5V Showing 1.5V Voltage
VGFX Showing VGFX Voltage
Automatic FAN Control Enable or Disable automatic FAN control. Default setting is Enabled.
Table 5-21 Hardware Monitor (continued)
Field Description
Table 5-22 AMT Configuration
Field Description
Intel AMT
Enable/Disable Intel® Active Management Technology BIOS
Extension. Note: iAMT H/W is always enabled. This option just controls
the BIOS ex- tension execution. If enabled this requires additional
firmware in the SPI device. Default setting is Enabled.
Intel AMT Hot Key
Enable or Disable Intel AMT Hot-Key during POST to enter MEBX
setup. Default setting is Enabled.
Intel AMT Setup Prompt
Enable/Disable Intel AMT Setup Prompt to wait for hot-key to enter
setup. Default setting is Disabled.
Activate Remote
Assistance Process
Trigger CIRA boot. Default setting is Disabled.
Un-Configure ME Un-Configure ME without a password. Default setting is Disabled.
USB-R Feature Enable/Disable USB-R. Default setting is Disabled.
Table 5-23 ME Configuration
Field Description
ME FW Version Intel Management Engine firmware version.
ME Firmware Intel Management Engine firmware state.
Intel ME Enable/Disable Intel® Management Engine. Default setting is Enabled.