SMART Embedded Computing COMX-CORE-2610-ET, Installation And Use Manual

Page: 72 / 92

72 COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS
Advance Menu
Table 5-10 HDD Configuration
Field Description
SATA Device Enable/Disable SATA device. Default setting is Enabled.
Interface Combination
Select the SATA controllers operation mode. Default setting is
Enabled.
RAID Alternate Device ID
Changes the device ID to 292X from 282X in RAID mode to
prevent the IMSM driver from loading on the platform. Default
setting is Disabled.
Software Feature Mask
Configuration
Software Feature Mask Configuration.
Serial ATA Port 0 / Hard Disk 0 Display the identity of the device attached.
Serial ATA Port 1 / Hard Disk 1 Display the identity of the device attached.
Serial ATA Port 2 / Hard Disk 2 Display the identity of the device attached.
Serial ATA Port 3 / Hard Disk 3 Display the identity of the device attached.
Serial ATA Port 4 / Hard Disk 4 Display the identity of the device attached.
Serial ATA Port 5 / Hard Disk 5 Display the identity of the device attached.
Table 5-11 Software Feature Mask Configuration
Field Description
RAID0 Enable/Disable RAID0 feature. Default setting is Enabled.
RAID1 Enable/Disable RAID1 feature. Default setting is Enabled.
RAID10 Enable/Disable RAID10 feature. Default setting is Enabled.
RAID5 Enable/Disable RAID5 feature. Default setting is Enabled.
Table 5-12 Memory Configuration
Field Description
Memory Frequency Maximum memory frequency selections in MHz. Default setting is Auto.