SMART Embedded Computing COMX-CORE-2610-ET, Installation And Use Manual

Page: 70 / 92

70 COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS
Advance Menu
Network Configuration Enable/Disable PCH internal LAN.
AMT Configuration Configure Active Management Technology (AMT) parameters.
Hardware Monitor NCT7802Y Hardware Monitor.
ME Configuration Configure Management Engine (ME) technology parameters.
Table 5-5 Advanced Menu (continued)
Field Description
Table 5-6 Boot Configuration
Field Description
Quick Boot Enable/Disable quick boot. Default setting is Disabled.
Boot in Legacy Video
Mode
Enable to force the display adapter to switch the video mode to Text
Mode 3 at the end of POST for legacy boot mode. Default setting is
Disabled.
Table 5-7 Processor Configuration
Field Description
Active Processor Cores
Number of cores to enable in each processor package. Default setting
is All.
Intel HT Technology
When disabled only one thread per enabled core is enabled. De- fault
setting is Enabled.
CPU Flex Ratio Settings
This value must be between Max efficiency ratio (LFM) and Max non-
turbo ratio set by Hardware (HFM). Default setting is HFM.
Enabled XD
Enabled Execute Disabled functionality. Also known as Data Execution
Prevention (DEP). Default setting is Enabled.
Intel® Virtualization
Technology When enabled, a VMM can utilize the additional hardware capabilities.
Default setting is Disabled.
Fast Boot Memory
Initialization Enable to reduce the amount of time spent initializing memory during a
cold boot. Default setting is Disabled.