68
ATCA-F140 Series Installation and Use (6806800M67S)
Controls, LEDs, and Connectors
Controls, LEDs, and Connectors
3.1.1
LEDs
The following table describes the functions of the front panel LEDs.
NOTE:
Shaded lines for Telco Clock LED 1, 2, 3 & 4 apply only to the ATCA-F140-TCLK3
blade.
Table 3-1
Front Panel LEDs
LED
Color
Function
Out of Service
Red
Blade out of service
Amber
Not used, available only for application usage
In Service
Green
Blade in service
Attention
Yellow
Blade attention required
Hot Swap
Blue
Blade hot swap status
ETH5 Activity
Green
Blinking - ETH5 activity
ETH5 Link
Yellow
10/100/1000 Ethernet link
T1/E1-1
(Telco Clock LED 2)
Yellow
Loss of Signal
Green
Status OK
Red
Blinking - Status unknown
T1/E1-2
(Telco Clock LED 4)
Yellow
Loss of Signal
Green
Status OK
Red
Blinking - Status unknown
MODE
(Telco Clock LED 1)
Yellow
Slave Clock Generator
Green
On - Master Clock Generator
Blinking - Stand Alone Master
Red
Blinking - Status unknown
LOCK
(Telco Clock LED 3)
Yellow
On -Hold Over
Blinking - Free Run
Green
Locked
Red
Blinking - Status unknown
