T A B L E S
ASSEMBLY INSTRUCTIONS
www.smartdesks.com
800-770-7042
iGroup® Tables are shaped in right triangles with a curve on the
user side. They are produced to order with this curve on the
right or left side, usually in sets, to produce mirror-image shapes
or radial shapes.
These are Mirror-Image shapes made up of equal
numbers of Lefts and Rights.
These are Radial Shapes
made up of All Lefts or All Rights.
A grouping is arranged, then the casters are
locked to keep the arrangement stable. Plako®
interlocking plates are fixed to the underside
to provide additional connected stability to the
arrangement.
Three legs are attached to each iGroup Table
Element, using 8 hex head/phillips drive 1/4-20
bolts, provided for each leg.
Mesh modesty panels provide wire manage-
ment with hook/loop closures. They hang from
two hooks which are attached with screws.
Legs may be fixed height or adjustable height.
They install the same way. A SnapChase™
wire management sleeve is shown installed on
a rear leg.
© 2014 CBT Supply, Inc. dba SMARTdesks® All rights reserved. SMARTdesks is a registered trademark of CBT Supply, Inc.