iLOG
2.4GHz Wireless Strain Logger (WL-S)
SMA Connector
A connector used to connect the antenna
DC Jack
Jack for battery charging Input voltage : 4.2~7V
LED Display
To display the charging status and operation status LED
i h
i
LED Display
To display the charging status and operation status LED
Mount hole
Holes for fixing to the structure of ILOG
Switch
Power ON/OFF and mode change switch
Sensor Connector
A connector to connect to the bridge box or sensor
Switch Operation
You can turn on the ILOG power When do you long time push to the switch
(3 seconds over), or turn off.
•
Use to mode method
-
Flash saving mode
If you want to using the mode of flash memory save then you can try push the
If you want to using the mode of flash memory save then, you can try push the
switch short time twice and long time once.
◦ ◦ ▬
Flash memory save mode except to a Bluetooth
-
Bluetooth setting mode
Although the ILOG has the Bluetooth default settings(Acceptor mode),
User can do try mode change (Bluetooth acceptor mode or MSP
connect mode).
connect mode).
But we don’t recommend try this mode because suit factory set to user's
situation.
◦ ◦ ◦ ◦ ◦ ▬
,
◦
Bluetooth acceptor mode
◦ ◦ ◦ ◦ ◦ ▬
,
◦ ◦
MSP CH1 connect mode
◦ ◦ ◦ ◦ ◦ ▬
,
◦ ◦ ◦
MSP CH2 connect mode
◦ ◦ ◦ ◦ ◦ ▬
,
◦ ◦ ◦ ◦
MSP CH3 connect mode
◦ ◦ ◦ ◦ ◦ ▬
,
◦ ◦ ◦ ◦ ◦
MSP CH4 connect mode
,
*
◦
Push the switch 3 seconds under
▬
Push the switch 3 seconds over
