SMART Board SmartBoard 600i2, Configuration And User'S Manual

Page: 34 / 74

24 Connecting Your 600i2 Interactive Whiteboard System 99-00850-21 B0
Connecting Peripheral Visual or Audio-Visual Devices
To connect a DVD player, VCR, document camera, digital camera or other visual or audio-visual peripherals
to the SMART Board interactive whiteboard system, you must connect your peripheral’s video and audio outputs
to the ECP. You can have up to three peripheral devices and a host computer connected at one time.
To connect S-video, composite and other audio-visual inputs for peripheral devices
IMPORTANT
If you have peripheral devices that do not use a 4-pin mini-DIN connector or an RCA composite
video jack, or if your device has an audio connection that does not use RCA jacks, you might
need to purchase third-party adapters.
1. Turn off your SMART Board interactive
whiteboard system.
2. Connect the device’s video cables to the ECP
using the appropriate inputs. Input 2 is the
VGA connector, input 3 is the S-video 4-pin
mini-DIN connector and input 4 is the
composite video input.
3. For each peripheral device, connect the
device’s audio cables to the associated red
and white RCA jacks next to the appropriate
video input.