APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
43
smarttech.com/kb/170340
Submenu setting
Description
Power
Turns the projector on or puts it into Standby mode. Select the Power
ON or Power OFF button.
Restore All Projector
Defaults
Returns projector settings to default values or refreshes the current
settings. Select Submit or Refresh.
IMPORTANT
The Submit option is irreversible and resets all values.
Volume
Adjusts the projector’s volume from -20 to 20.
Mute
Turns on or turns off the mute settings. Select On to mute the
projector’s sound and Off to turn off mute.
Volume Control
Enables volume control on the on-screen display. Select On to
enable projector volume adjustment and select Off to disable
projector volume adjustment.
Closed Captioning
Turns on or turns off the closed captioning feature.
Display Mode
Adjusts the display output to SMART Presentation, Bright Room,
Dark Room, sRGB and User modes so you can project images from
various sources with consistent color performance:
l
SMART Presentation is recommended for color fidelity.
l
Bright Room and Dark Room are recommended for locations
with those conditions.
l
sRGB provides standardized accurate color.
l
User enables you to apply your own settings.
Brightness
Adjusts projector brightness from 0 to 100.
Contrast
Adjusts the difference between the lightest and darkest parts
of the image from 0 to 100.
Frequency
Adjusts the display data frequency of the projected image from
-5 to 5 to match the frequency of your computer’s graphics card.
Tracking
Synchronizes your projector’s display timing with your computer’s
graphics card from 0 to 31.
Sharpness
Adjusts the projected image’s sharpness from 0 to 31.
White Peaking
Adjusts the image color brightness from 0 to 10 while providing more
vibrant white shades. A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness.
Degamma
Adjusts the color performance of the display from 0 to 3.
Color
Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colors on
the projector from 0 to 100 to provide custom color and luminance
output. Each color has a default value of 100. Adjustments to the
color settings register to the User mode.