A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
70
Command
Response
Powered off
get error#
error#=[current]
yes
set factoryreset
[target]
factoryreset=[current]
yes
set highspeedfan
[target]
highspeedfan=
[current]
no
get highspeedfan
highspeedfan=
[current]
no
set statereporting
[target]
statereporting=
[current]
yes
get statereporting
statereporting=
[current]
yes
get poweroverride
poweroverride=
[current]
no
set poweroverride
[target]
poweroverride=
[current]
no
Field definitions
Field
Possible Values
Description
current displayhour
0 to 20000
Current display hours.
target testpattern
= 1 to 4
Set the test pattern to pattern number (1 to 4).
If there’s only one test pattern, call it test
pattern 1.
current testpattern
l
1: Grid
l
2: Red
l
3: Green
l
4: Blue
l
5: Grey
l
6: Black
Test pattern being displayed. The built-in test
pattern can be changed.
target colorwheelidx
= ???
The ranges must match the OSD ranges.
current colorwheelidx
???
The ranges must match the OSD ranges.
