A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
61
>set volume=-10
volume=-10
>set 5
volume=-5
>set volume -15
volume=-20
Network information
Use these commands to set your network information.
Command/response definitions
Command
Response
Powered off
get netstatus
netstatus=[current]
yes
set network
network=[current]
yes
get network
network=[current]
yes
set dhcp [target]
dhcp=[current]
yes
get dhcp
dhcp=[current]
yes
set ipaddr [target]
ipaddr=[current]
yes
get ipaddr
ipaddr=[current]
yes
set subnetmask
[target]
subnetmask=[current] yes
get subnetmask
subnetmask=[current] yes
set gateway [target]
gateway=[current]
yes
get gateway
gateway=[current]
yes
set primarydns
[target]
primarydns=[current]
yes
get primarydns
primarydns=[current]
yes
get macaddr
macaddr=[MAC
address]
yes
