SMART Board Board 600i6, Configuration And User'S Manual

Page: 26 / 117

C H A P T E R 3
Using your interactive whiteboard system
13
Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector
settings. Use the Power button on the remote control or ECP to put the projector into Standby
mode or to turn it on. You can also use the Input button on the remote control or ECP to switch
sources on the projector.
Number Function Description
1 Input Select a video and audio input source on the
projector and the associated USB input source on
the ECP.
2 Menu Show or hide the projector menus.
3 (Left), (Right),
(Up) and (Down) arrows
Change the menu selections and adjustments.
4 Hide Freeze, hide or display the image:
l
Press once to freeze the image.
For example, you can display a question on
the screen whilst you check your email.
l
Press again to hide the image, that is, to
display a black screen.
l
Press again to return to the live image.
5 Mode Select a display mode.
6 Mute Mute audio amplification.
7
(Power)
Turn on the projector or put it into Standby mode.
8 (Enter) Accept the selected mode or option.
9 (Volume Up) Increase audio amplification volume.
10 (Volume Down) Decrease audio amplification volume.