A P P E N D I X A
Using the on-screen display menu
78
smarttech.com/kb/170446
Option
Values
Function
Notes (if any)
Input2
VGA
HDMI1
DVI-D
Display Port
HDMI2
HDMI3/PC
Specifies the second video input
for fail over mode
You can modify this option only if
you select
Manual
in
Mode
.
Input3
VGA
HDMI1
DVI-D
Display Port
HDMI2
HDMI3/PC
Specifies the third video input for
fail over mode
You can modify this option only if
you select
Manual
in
Mode
.
Input4
VGA
HDMI1
DVI-D
Display Port
HDMI2
HDMI3/PC
Specifies the fourth video input for
fail over mode
You can modify this option only if
you select
Manual
in
Mode
.
Input5
VGA
HDMI1
DVI-D
Display Port
HDMI2
HDMI3/PC
Specifies the fifth video input for fail
over mode
You can modify this option only if
you select
Manual
in
Mode
.
DPM Select
On
Off
Enables or disables DPM Select
DivX® VOD
Registration
Deregistration
Registers DivX video-on-demand
(VOD)
Initial Setting
Yes
No
Resets options in all menus to their
default values
Set ID
1–255
Sets the interactive flat panel’s ID
Standby Mode
Standby
Sets the Standby mode to reduce
power consumption
Proximity Control
Proximity Control
On
Off
Enables or disables presence
detection
Re-enable Time
1–10
Sets how long the interactive flat
panel waits before detecting
motion again (in minutes)
Auto Power Off
15–240
Sets when the interactive flat panel
automatically turns off (in minutes)
