C H A P T E R 5
Using your interactive flat panel
31
smarttech.com/kb/170446
Turning on and turning off SMART Board 8084i-G4-SMP
interactive flat panels
To turn on your interactive flat panel
1. Turn on your computer.
2. Press the
Power/Standby
button
on the front control panel.
OR
Press the
POWER
button or the
MONITOR ON
button on the remote control.
Your computer’s logon screen or desktop appears on your interactive flat panel.
I M P O R T A N T
If the power light on the front control panel is off, either the interactive flat panel is not plugged
in or the main power switch on the back of the interactive flat panel is turned off. To find the
main power switch, see
To turn off your interactive flat panel
1. Turn off your computer.
2. Press the
Power/Standby
button
on the front control panel.
OR
Press the
POWER
button or the
MONITOR OFF
button on the remote control.
Using presence detection
Your interactive flat panel has two
presence detection sensors on its frame
that can detect people up to 16' (5 m)
away when the interactive flat panel is in
Standby mode.
When the sensors detect motion in the
room, the interactive flat panel turns on
and displays a welcome screen.
Touching the screen activates the
interactive flat panel. When the sensors
no longer detect people in the room, the interactive flat panel returns to Standby mode.
