11 |
INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE
WHITEBOARD SYSTEM (APPLIANCE-BASED)
Installing the control module cable
To keep the I²C cable out of sight behind the interactive whiteboard, you must route
the cable along the track on the back of the interactive whiteboard before you install it.
To install the control
module cable
1. Place the included control module cable into the track on the back of the
interactive whiteboard.
2. Run both ends of the cable through the notches in the track leaving the ends
hanging near each end of the bottom frame.
Mounting the interactive whiteboard
Follow this procedure to mount your SMART Board 685 interactive whiteboard on the
FUWM-600.
To mount your
interactive whiteboard
1. Attach the round spacers to the back of the
interactive whiteboard.
NOTE
The round spacers are provided with the
FUWM-600.
2. Verify that no cables or hardware that can
interfere with the wall mount are attached to the
back of the interactive whiteboard.
3. With the help of another person, hang your
interactive whiteboard on the wall mount near the center of the bracket.
Notches