SMART Board 680iv, Configuration And User'S Manual, Page: 67 / 92

Appendix A: Remotely managing your
interactive whiteboard system
Web page management 58
Accessing web page management 58
Home 58
Control panel 58
Network settings 60
E-mail alerts 61
Password settings 61
Connecting your room control system to the SMART V25 projector 62
Pin configuration on the projector’s RS-232 connector 62
Serial interface settings 62
Projector programming commands 64
Projector power state controls 64
Command inventory 64
Value-based command methods 64
Absolute values and adjustment values 64
Video source specification values 65
Power state controls 65
Source selection controls 66
General source controls 67
Additional VGA source controls 68
Additional composite video source controls 68
Audio output controls 69
Network controls 70
System controls 71
Simple Network Management Protocol (SNMP) 74
This appendix includes detailed instructions on how to set up your computer or room control system
to remotely manage your SMART Board 680iv interactive whiteboard system settings through an RS-
232 serial interface.
Appendix A
57