Setting
Use
Notes
Resolution
Displays the projector’s most recently
detected video source signal resolution
and refresh rate.
If there is no current video input source
signal, this setting displays the last
known source signal image resolution
and refresh rate.
Firmware Version
Displays the projector’s digital display
processor (DDP) firmware version in
x.x.x.x format.
MPU Version
Displays the projector microprocessor
unit (MPU) firmware version in x.x.x.x
format.
Network Version
Displays the projector’s network
communications processor firmware
version in x.x.x.x format.
If you haven’t enabled the
Network
and VGA Out
setting, this setting is
unable to display the projector’s
network communications processor
firmware version and displays 0.0.0.0
instead.
Model Number
Displays the projector’s model number.
Serial Number
Displays the projector’s serial number.
Focusing the image
Use the focus dial located on the bottom of the SMART UX60 projector to focus the projected image.
g
To focus and adjust the image
Turn the focus dial clockwise or counterclockwise until the image is in focus.
C H A P T E R 3
Using your interactive whiteboard system
21