l
Remote management via network through an RJ45 cable
OR
Remote management via a serial RS-232 interface
l
Self-protection timer for a hot re-strike of the projector lamp
l
Protected cable routing through the projector housing and a cable cover that prevent tampering
and clutter
l
Cleaning cloth for use on the projector lens and system mirror
l
Secure mounting and installation system that includes:
o
Two projector padlock loops
o
Mounting hardware for solid masonry or framed wall installations
l
Templates and instructions for positioning the system safely
Your SMART UX60 projector connection panel supports the following connectors:
l
3-pin mini-DIN connector
l
4-pin powered mini-DIN connector and 7-pin mini-DIN connector
l
S-video input and associated dual-channel audio input (two RCA jacks)
l
HDMI connector input
l
Two HD-DB15 (VGA) inputs and associated audio input (3.5 mm jack) and one HD-DB15
(VGA) output and associated audio output (3.5 mm jack) with additional interface support for
Component YPbPr and Component YCbCr inputs with proper adapters (not included)
l
RJ45 cable for local area network connections
l
RS-232 connector
l
USB B receptacle for service access
Extended Control Panel (ECP)
Your projector system’s ECP attaches to the bottom frame
of your interactive whiteboard. The ECP features controls
for power, source selection and volume adjustment, as well
as an integrated USB hub that enables you to switch
seamlessly between two connected computers.
C H A P T E R 1
About your interactive whiteboard system
4