SMART Board 480i6, Configuration And User'S Manual

Page: 6 / 106

I M P O R T A N T I N F O R M A T I O N
iv smarttech.com/kb/170584
Environmental requirements
Before you install your SMART Board 480 interactive whiteboard system, review the following
environmental requirements.
Environmental
requirement Parameter
Operating temperature
l
5°C to 35°C (41°F to 95°F) from 0 m to 1800 m (0' to 6000')
l
5°C to 30°C (41°F to 86°F) from 1800 m to 3000 m (6000' to 9800')
Storage temperature
Humidity
Water and fluid
resistance
l
Intended for indoor use only. Doesn’t meet any salt-spray or water
ingress requirements.
l
Don’t pour or spray liquids directly onto your interactive whiteboard,
the projector or any of its sub-components.
Dust
l
Intended for use in office and classroom environments. Not for
industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. Periodic cleaning is required in
areas with heavier dust. See
Cleaning the projector on page 29 for
information on cleaning the projector.
Electrostatic discharge
(ESD)
l
EN61000-4-2 severity level 4 for direct and indirect ESD
l
No malfunction or damage up to 8kV (both polarities) with a 330 ohm,
150 pF probe (air discharge)
l
Unmated connectors meet no malfunction or damage up to 4kV (both
polarities) for direct (contact) discharge
Cables
l
All SMART Board 480i6 interactive whiteboard system cables should
be shielded to prevent potential accidents and degraded video and
audio quality.
Conducted and radiated
emissions
l
EN55022/CISPR 22, Class A