Smart Avionics PB-4, User Interface Manual

Page: 28 / 78

• If the point was captured with acceleration data (see the With Waveform
Data option in Chapter 5 ), the Show/Hide Waveform button will be visible
and clicking that will toggle the display of the waveform.
• If adjustment values and move lines have been defined, the Calculate
Balance Solution button will be visible. This button opens the rotor balance
solution dialog that displays the calculated solution for the current point.
Fig 3.7. Point details dialog - rotor mode
The text input boxes are:
• The Notes text input box is used to enter any notes that you wish to record
for the point.
• Span adjustment, Chord adjustment and Pitch adjustment input boxes may
be used to update the adjustment values assigned to this point.
Note
The adjustments should be set before the points are captured by
clicking in the Span, Chord or Pitch columns of the polar point
list header. If that is done, the adjustment values will be copied
into points as they are captured. However, if you forget to enter
that information before capturing the points or you need to change
the values for some reason then this information can be edited
in the point details dialog.
www.smartavionics.com 22
Point details dialog