SMA Solar Technology AG
Assembly
Installation Guide
TempsensorAmb-IEN110610
7
4 Assembly
4.1 Selecting the Mounting Location
• The Ambient Temperature Sensor must be assembled
with the cable gland pointing downwards in order to
prevent water from accumulating on the cable gland.
• Protect the Ambient Temperature Sensor from severe
contamination and spray.
• See adjacent image for recommended alignment of
the Ambient Temperature Sensor.
• Select an installation location which is in shade
throughout the entire day.
• Make sure that heat cannot accumulate at the
installation site.
• Please observe the maximum cable length of 30 m.
4.2 Assembling the Ambient Temperature Sensor
1. Undo four bolts on the Ambient Temperature Sensor enclosure and remove the lid.
2. Determine the mounting location and mark it. In the process, observe the mounting area
(see image).
3. Fasten the Ambient Temperature Sensor enclosure using the screws supplied.
☑ The Ambient Temperature Sensor has been assembled.
Summary of Contents for TEMPSENSOR-AMBIENT
Page 2: ......