Event number
Message, cause and corrective measures
6001 to 6438
Self diagnosis > Interference device
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
6501 to 6511
Self diagnosis > Interference device
The inverter has switched off due to excessive temperature.
Corrective measures:
1. Clean the fans (see Section 10.3, page 51).
2. Ensure that the inverter has sufficient ventilation.
6512
Minimum operating temperature not reached
The inverter will only recommence grid feed-in once the temperature has
reached at least −25°C (−13°F).
6603 to 6604
Self-diagnosis > Overload
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
6606
Interference device
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
6701 to 6702
Communication disturbed
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
6801 to 6802
Self-diagnosis > Input A defective
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
6901 to 6902
Self-diagnosis > Input B defective
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
7001 to 7002
Sensor fault fan permanently on
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
10 Troubleshooting
SMA Solar Technology America LLC
Installation Manual
STPTL-US-10-IA-xx-17
46
ENGLISH
Summary of Contents for SUNNY TRIPOWER 12000TL-US
Page 232: ...www SMA America com ...
