SMA SB 4200TL HC, Installation Manual

Page: 34 / 64

Technical Data SMA Technologie AG
Page 34 SBTLHCMS-IEN080411 Installation Guide
8. 2 Grid connection data
Description Short
descrip-
tion Setting
SB 4200TL HC SB 5000TL HC
Nominal output power P
ACnom
4000 W 4600 W
Max. output power P
ACmax
4200 W 5000 W
Nominal output current I
ACnom
17.5A 20A
Harmonic distortion of output cur-
rent (at K
Ugrid
< 2 %, P
AC
> 0.5
P
ACnom
)
K
IAC
< 3 %
Operating range, grid voltage U
AC
180 - 260 V AC
Germany: 198 - 260 V AC
b)
Operating range, grid frequency f
AC
45.5 - 52.5 Hz
Germany: 47.55 - 50.2 Hz
Phase shift angle (based on the cur-
rent's fundamental frequency) cos phi 1 (at nominal power output)
Overvoltage category III
Test voltage (50 Hz) 1.65 kV (1 s routine testing / 5 s type
testing)
Test surge voltage 4 kV (1.2/50 ms)
(serial interface: 6 kV)
Internal consumption in night mode 0.25 W
b) The Sunny Boy can temporarily feed power into the grid with a maximum output
voltage of 260 V. However, DIN VDE 0126-1-1 stipulates that the 10-minute
average must not exceed a voltage of 253 V. That means, if the grid voltage is
continuously 254 V (e.g.), the inverter disconnects itself from the grid. In this
case, contact the local grid operator for assistance.
DIN VDE 0126-1-1 only applies in Germany. See section 8.4. 3 "Country-spe-
cific Parameter Settings" (Page 43) for all other preset country values of your
inverter.