5 Mounting
SMA Solar Technology AG
Installation Manual
MDSEN-US-40-IA-en-13
13
5
Mounting
5.1
Mounting position
DISPLA
Y
BAT
Max. 30V DC
USB
FCC ID: SVF-KP
IC: 9440A-KP20
MFR
A
B
X1
X2
A
B
C
Figure 4: Communication assembly in the inverter with mounting position for the module
Position
Designation
A
Communication assembly
B
Module slot
M1
*
C
Module slot
M2
* Production resources SMA Solar Technology AG recommends using module slot
M1
for the module.
5.2
Installing the Module
NOTICE
Damage to the product due to sand, dust and moisture ingress
Sand, dust and moisture penetration can damage the product and impair its functionality.
• Only open the inverter if the humidity is within the thresholds and the environment is free of
sand and dust.
• Do not open the inverter during a dust storm or precipitation.
• Close tightly all enclosure openings.
• Only use listed rain-tight or liquid-tight conduit fittings to attach the conduits to the product.
Maximum number of modules of the same device type per inverter
You can only use a maximum of 1 SMA Sensor Module per inverter.
Summary of Contents for MD.SEN-US-40
Page 35: ......
Page 36: ...www SMA Solar com...