SMA MD.SEN-US-40, Installation Manual, Page: 12 / 36

4 Product Overview SMA Solar Technology AG
Installation Manual MDSEN-US-40-IA-en-13 12
Position Designation Explanation
E TEMP-IN Terminals for the temperature measurement
F – Connector strip on the back of the module for connection
to the communication assembly in the inverter
4.2 Type Label
The type label clearly identifies the product. The type label is located on the front of the product.
Figure 3: Design of the type label
Position Explanation
A Device type
B Serial number
C Hardware version
You will require the information on the type label to use the product safely and when seeking
customer support from Service (see Section 11 "Contact", page 34).