SMA DATA MANAGER M, Operating Manual

Page: 18 / 58

4 Product Overview SMA Solar Technology AG
Operating manual EDMM-10-BE-en-20 18
Figure 3: Network port LEDs
Position Designation Color Explanation
A Link LED Green Shows the network connection status.
B Activity LED Yellow Shows network connection activity.
4.5 Sunny Portal
Sunny Portal is an Internet portal which enables you to monitor systems and to visualize system
data.
The Sunny Portal serves as the user interface for the extended configuration of the product, of
system sections, systems, system groups and the entire system portfolio. The Sunny Portal monitors
and analyzes the system and its components on all levels.
There are two Sunny Portal versions: the classical Sunny Portal (https://www.sunnyportal.com) and
the newly developed Sunny Portal powered by ennexOS (https://ennexOS.sunnyportal.com). Both
systems differ in their supported functions. With an existing user account, you can log into both
portals as well as into Sunny Design (system planning software from SMA).
4.6 Interfaces and Functions
The product can be equipped or retrofitted with the following interfaces and functions: The
availability of the functions depends on the product version and additional options purchased.
For further information on current and future functions, refer to the product page at www.SMA-
Solar.com.
User interface for monitoring and configuration
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product. The product user interface can be called up via the web
browser if there is an existing connection to an end device (e.g. computer, tablet PC or
smartphone).
Connected SMA products can be configured and commissioned via the user interface of the
product.
WLAN access point
The product is equipped with a WLAN interface as standard. By tapping on the product, a WLAN
access point is activated. This point is used to connect the product to an end device (e.g. computer,
tablet PC or smartphone). This allows to carry out commissioning and configuration via direct
WLAN connection on site regardless of the wired network.