Mounting
SMA Solar Technology AG
34
SBU2200-TEN083320
Technical Description
5.2.2 Selecting the Mounting Location
• The mounting location and mounting method must be suitable for the weight (approx. 4.5 kg)
and dimensions.
• Select a solid surface for mounting the device.
• The mounting location must be accessible at all times (do not mount in inaccessible locations).
• An ambient temperature between -25 °C and +60 °C ensures optimum operation.
• Do not expose the device to direct sunlight.
5.2.3 Wall Mounting
1. Use the housing as a drilling template.
2. Fasten the device on the wall using four screws.
Mount the device using the provided rubber
washers!
They seal the mounting holes (8 mm diameter)
in the rear housing wall (IP 54).
3. Tighten the screws evenly.
4. Ensure that it is securely in place!
DANGER!
Danger to life due to fire or explosion.
Do not install the device
• on flammable construction materials,
• in areas where highly flammable materials are stored,
• in potentially explosive areas
NOTICE!
Short circuit due to condensation.
Condensation water can build up if the device is operated in a horizontal position.
• Only operate the device when it is in a vertical position hanging on a wall.
Mounting Material
When mounting the device, use fastening material suitable for the mounting surface.
