manualshive.com logo in svg

SMA Solar Technology AG STORAGE PACKAGE - BUSINESS, System Manual, Page: 5 / 30

Share
Download
SMA Solar Technology AG STORAGE PACKAGE - BUSINESS System Manual Download Page 5

1  Information on this Document

SMA Solar Technology AG

System Manual

SPBusiness-SH-en-10

5

1

Information on this Document

1.1

Validity

This document is valid for:

• SMA Storage Package - Business

1.2

Target Group

The tasks described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:

• Knowledge of how an inverter works and is operated
• Knowledge of how batteries work and are operated
• Training in how to deal with the dangers and risks associated with installing, repairing and

using electrical devices, batteries and installations

• Training in the installation and commissioning of electrical devices and installations
• Participation in a certification training for the battery STORAGE-67-TS-10
• Knowledge of all applicable laws, standards and directives
• Knowledge of and compliance with this document and all safety information
• Knowledge of and compliance with the documents of the battery manufacturer with all safety

information

1.3

Content and Structure of this Document

This document summarizes the specific information for the system and describes the procedure for
installation and commissioning.
Circuitry overviews provide the basic principle of how a system must be set up and connected.
The latest version of this document and the comprehensive manual for installation, commissioning,
configuration and decommissioning of each SMA product can be found in PDF format or as
eManual at www.SMA-Solar.com.
This document supplements the documents that are enclosed with each product and does not
replace any locally applicable codes or standards. Read and observe all documents supplied with
the product.
Illustrations in this document are reduced to the essential information and may deviate from the real
product.

1.4

Levels of Warning Messages

The following levels of warning messages may occur when handling the product.

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Summary of Contents for STORAGE PACKAGE - BUSINESS































Reviews:

No comments