manualshive.com logo in svg

SMA Solar Technology AG STORAGE PACKAGE - BUSINESS, System Manual, Page: 27 / 30

Share
Download
SMA Solar Technology AG STORAGE PACKAGE - BUSINESS System Manual Download Page 27

6  Commissioning

SMA Solar Technology AG

System Manual

SPBusiness-SH-en-10

27

2. Select 

System parameter assistant

.

3. Select all PV inverters.
4. Select [

Next

].

5. Select the parameter 

External communication

 and set to 

No

.

6. Select [

Next

].

7. Click on [

Save

].

6.11 Configuring SMA SPOT in Sunny Portal powered by

ennexOS (optional)

1. Select 

Configuration > System properties

.

2. Activate the 

SMA SPOT

 switch and enter the data.

6.12 Completing the Commissioning Report

1. Download the commissioning report (Excel file) from the download area at www.SMA-

Solar.com.

2. Complete the commissioning report (Excel file).
3. E-mail the completed commissioning report to 

EnergySystem-Commissioning-

[email protected]

 as an Excel file.

☑ Once the commissioning report has been received, the ten-year system warranty is activated

and you will receive a corresponding confirmation.

Summary of Contents for STORAGE PACKAGE - BUSINESS































Reviews:

No comments