USER GUIDE
27841HSG
2 Way Plug-In Aerial Amplifier
Introduction
This SLx plug-in aerial amplifier is designed to improve picture and sound quality by amplifying
weak UHF and VHF signals.
4G Ready - built-in filter removes interference and channel loss caused by 4G mobile phone signals.
These instructions cover the most common installation options. However, if you need further
advice, please contact our Customer Careline (see overleaf).
Please Note: If used to boost signals from the RF2 output on a satellite receiver you will need a TV
with an analogue tuner to view the satellite signal.
Boosting the signal to your TV / Freeview ™ Box / PVR
Standard installation for weak signal areas
1. Connect the UHF aerial downlead (typically via an aerial
wall socket) to the
INPUT
socket of the SLx amplifier.
2. Connect an aerial flylead from the
OUTPUT
socket of the SLx
amplifier to the aerial input (usually marked “ANT IN”) on the
back of your TV Freeview™ receiver or PVR (digital recorder).
ANT IN
TV
Output
Input
Outdoor
Aerial
Coax Aerial Lead
(Not Supplied)
Coax Aerial Lead
(Not Supplied)
Gain Control
Output
ANT IN
Coax Aerial Lead
(Not Supplied)
Freeview™
Receiver or PVR
TV
TV with built-in
Freeview™ Receiver
Aerial
Outlet
Ready
