SLS CS6600, User Manual, Page: 17 / 23

CS600RF Array Assembly Overview
SLS™ CS6600 Line Array Module and CS6600RF Rigging Frame User’s Guide 9
3. Pull on the pin once to confirm that the pin is locked into position.
Figure 2 ‐ 5
Figure 2-5 Attaching the First CS6600 to the CS6600RF
2.2.6 Attaching CS6600 to CS6600
The next CS6600 attaches to the CS6600 above it using the three positive lock pins that are
provided with each CS6600.
1. Install two pins in the front and the third pin in the back to set the box ‐ to ‐ box
articulation angle, as shown in the following figure.
Figure 2 ‐ 6
Figure 2-6 Box-to-Box Positive Lock PLP Pin Placements
Warning: YOU MUST FULLY INSERT THE PROVIDED POSITIVE LOCK PLP PINS,
SUCH THAT THEY CANNOT BE PULLED OUT WITHOUT ENGAGING THE
RELEASE BUTTON.