Universal Live Timing Box Rev 2.0 User manual
The amount of data that can be stored depends on the situation the user is in. In particular, in
case a
it is possible to store about 200.000 among laps and sectors. In
case b
it is possible to store data for
about 23 minutes.
The user can enable and disable Data Storage several times without having to delete the data stored
in previous sessions.
Once the content of the
Universal Live Timing Box
's memory has been downloaded, the data will be
differentiated according to the storage session they belong to. In particular, they will be shown in
the following format:
#stint.#lap
lap time
sector time#1......... sector time#n
where:
•
#stint: indicates the number of the data storage session;
•
#lap: indicates the number of the lap performed during the #stint session. #lap is reset at the
beginning of every new data storage session;
•
lap time: driver lap time on the lap number: #lap;
•
sector time #1: driver sector time on the sector number 1;
•
sector time #n: driver sector time on the sector number n.
To change from a storage modality "times only" to a "complete telemetry" one and vice versa, it is
necessary to delete the memory and position, in the first case, at least one of the switches on "ON";
in the second case, both switches on "OFF".
As for the
mute
button, also for the
Mem on/off
one the
Universal Live Timing Box
remembers the
status the button is in before the supply is disconnected. This ensures that once the
Universal Live
13
Figure 10: high-current cartridge
Figure 9: negative/positive analog cartridge
