Code No. 0816597
Rev. 0b (08/08)
SIDE-MOUNT-OPERATOR-OVER-THE-HANDLE
EL-600-A SMOOTH HARDWIRE ADAPTER KIT
1
Slide the unit over the existing
handle up to the flushometer body.
NOTE: Water does not need to be shut off.
IMPORTANT: Install all electrical wiring in accordance with National/Local Codes and Regulations.
2
3
4
Suggested mounting location of
Electrical Supply Flange.
Swing the Mounting Clamp around
the flushometer body and press the
clamp end into the unit until it clicks
into place.
Tighten unit by pushing in on the
spring loaded Mounting Screw and
turning clockwise with a 1/8” hex
wrench.
Do Not overtighten.
FLANGE
