Slime 50129 Instructions Download Page 1

PART#50129 | REV040618ART

 

ATTENTION! READ ALL INSTRUCTIONS CAREFULLY

FAILURE TO FOLLOW WARNING INSTRUCTIONS CAN RESULT IN FIRE,  

PERSONAL INJURY OR PROPERTY DAMAGE. 

POWER SOURCE

• Plugs into 12 volt,
  15 amp power outlet
• 10ft. (3m) length

ON/OFF

SEALANT/
AIR HOSE

ENGLISH

REPLACEABLE SLIME 
SEALANT CARTRIDGE
# 10180

SELECT MODE
AIR OR
AIR + SEALANT

DIAL GAUGE

Measures PSI/BAR

PRESSURE RELEASE

 

Deflates tyre
if it has too much air

VALVE

DEPRESSOR*

ADAPTERS

PRESTA

VALVE

BALL INFLATABLES

* VALVE DEPRESSOR IS TO BE USED WITH ACCESSORY ADAPTERS (SEE PAGE 2)

CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A HARD, CLEAN 

SURFACE.

1. DO NOT run vehicle while inflator is operating. You may need to be in “accessory” or “on” position. 

Please make sure emergency brake is set and car is in park. Always ensure the valve connector is 

fully seated to depress the core of the valve stem for proper inflation.

2.  DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool approximately 25 

minutes between uses. Do not leave inflator unattended. 

3. ALWAYS use a pressure gauge to check tyre pressure. DO NOT overinflate.
4. Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful 

not to inflate items beyond their capacity.

5. While operating, never block the inflator input or output.
6. Keep inflator out of reach of children.
7. For  use  with  12  volt  DC  power  outlets  rated  15  amps  or  higher.  Do  not  use  with  older  8  amp 

cigarette lighter receptacles.

Reviews: