1.
2.
3.
a.
b.
FAQ
Definition of indicators
The definition of indicators on Breakout 3.0
Indicator name
Status
Definition
D1
light up red
power on Breakout 3.0
indicator on SLAMWARE Core
light up green
power on SLAMWARE Core
U6
light up and flash in blue color
during launching
light up blue
launch successfully
flash yellow color
battery lower than 30%
flash in red color
battery lower than 15%
Model Definition
Product
SLAMWARE SDP Mini
Model
A1M1-R1
Major
Components
SLAMWARE Core Lite Module (Model: B1M4, please refer to
for
KBSW180103 SLAMWARE Core Model Definition
details.)
RPLIDAR A2 Laser Range Scanner
SLAMWARE Core Breakout 3.0
two-wheeled differential drive motor
Unbinding SDP Mini and reset WiFi
when the SDP Mini is required to bind to another account of RoboHome mobile application or the network changes, the SDP Mini needs to be
unbound first, and after resetting Wifi, it can be bound to another account or be found in a new network environment. The steps are as below:
Turn on the SW1 switch on the SLAMWARE Breakout 3.0 of SDP Mini to launch the device;
Log in to the RoboHome with the account which is bound with the SDP Mini Refresh the
and the bound SDP Mini
Device Center
will be online Click
in the upper right corner to enter editing mode Click the crash bin icon in the right of the SDP mini Click
Edit
Yes,
Summary of Contents for SDP Mini
Page 5: ......