4
·
When exiting the search menu, the receiver will work on the channel where the triangle indicator is
located.
RF Racing
·
The <RF Racing> mode is specially set for the racing. In this mode, the goggels can work only on the
eight channels of the Race band. The regulating channels of <CH> button will be increased, while the
regulating channels of <BAND> button will be decreased. The channel search function can be only used
to scan the eight channels of the Race band.
Voltage Calibration
·
Add voltage calibration function in system menu, voltage can be calibrate around ±0.9V.
·
During the calibration process, the voltage reading is changing in real time.
·
For more accurate calibration, multi meter is required.
·
The Voltage reading on OSD is the loaded voltage of the battery(the goggles is the load), by using the
multi meter to reading the loaded voltage of the battery, you can calibrate the voltage reading on OSD, so
the reading is equal to the real voltage of the battery.
Button Function (
for the button function of playback mode, see the description of "Playback" part).
TRACK Button:
·
Short press the button in the normal mode to activate the Head Tracker reset function.
·
Long press the MENU button for 3 seconds to enter into the menu setting status.
·
Press the button to switch between the four main menus in the MENU status.
CH Button:
·
In the RF mode, short press the channel button to adjust the channel in cycles.
·
In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the
volume upwards.
·
Press the button in the MENU status to select the menu upwards.
BAND Button:
·
In the RF mode, short press the band button to adjust the band in cycles.
·
In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the
volume downwards.
·
Press the button in the MENU status to select the menu downwards.
REC Button:
·
In the RF and AV IN modes, short press the button to record the video, and then short press the
button again to stop recording the video.
·
The REC Button is set as the OK button in the MENU status.
·
The REC Button is set as the left selection button in the channel search status.
·
Long press the button for 3 seconds to enter into the playback mode.
MODE Button:
·
Short press the pop-up mode selection menu button to select the RF Normal, RF Racing, AV IN and
