32”-55” screens
37”-70” screens
Page 1: ...32 55 screens 37 70 screens ...
Page 2: ...e as a template to mark the location of the second hole in each stud Pre drill these holes using the 4mm drill bit as well Attach the Wall Plate to the wall using the 4 Lag Bolts e and 4 M6 Washers d Make sure the Wall Plate is ori ented so that the flat surface in the center of the plate is against the wall as shown in diagram 1 C Note Do not use any concrete anchor when you mount the bracket ont...
Page 3: ...ck you will not need a plas tic spacer as show in diagram 2 C Make sure these bolts are installed correctly Some screens have shallow thread ed inserts 4 extra washers have been provided that you may use to offset this if the provided bolts are too long Tighten the adjusting knobs on both TV Rails so that the mechanism does not move during installation 3 HANG THE TV ONTO THE WALL PLATE First hook ...
Page 4: ...E THAT ALL SCREWS ARE TIGHTENED PROPERLY If you have any doubts regarding installation be sure to consult with a professional 4 HORIZONTAL ADJUSTMENT Adjust the screen s horizontal position using the allen key included Tighten the two screws as shown in diagrams 4 A 4 B 4 C 5 B 5 A 4 A 4 B Horizontal Tilt Adjustment Screw 4 C Ratchet for Tilt Adjustment Designed Manufactured by Skywalker Communica...
