SKYTRONIC 103.315, Instruction Manual

Page: 2 / 24

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
•
The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
•
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
•
Do not place this unit on an unstable cart, stand or tripod, bracket or table. The unit may fall,
causing serious injury to a child or adult and serious damage to the unit. Use only with a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the unit. Any
mounting of the device on a wall or ceiling should follow the manufacturer instructions and
should use a mounting accessory recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force and uneven surfaces
may cause the appliance and cart combination to overturn.
•
Read and follow all the safety and operating instructions before connecting or using this unit.
Retain this notice and the owners manual for future reference.
•
All warnings on the unit and in its operating instructions should be adhered to.
•
Do not use this unit near water; for example, near a bath tub, washbowl, kitchen sink, laundry
tub, in a wet basement or near a swimming pool.
•
The unit should be installed so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that
may block the ventilation openings; or placed in a built-in installation, such as a bookcase or
cabinet, that may impede the flow of air through its ventilation openings.
•
The unit should be situated from heat sources such as radiators, heat registers, stoves or other
devices (including amplifiers) that produce heat.
•
The unit should be connected to a power supply outlet only of the voltage and frequency
marked on its rear panel.
•
The power supply cord should be routed so that it is not likely to be walked on or pinched,
especially near the plug, convenience receptacles, or where the cord exits from the unit.
•
Unplug the unit from the wall outlet before cleaning. Never use benzine, thinner or other
solvents for cleaning. Use only a soft damp cloth.
•
The power supply cord of the unit should be unplugged from the wall outlet when it is to be
unused for a long period of time.
•
Care should be taken so that objects do not fall, and liquids are not spilled into the enclosure
through any openings.
•
This unit should be serviced by qualified service personnel when: The power cord or the plug
has been damaged; Objects have fallen, or liquid has been spilled into the unit; The unit has
been exposed to rain or liquids of any kind; The unit does not appear to operate normally or
exhibits a marked change in performance; The device has been dropped or the enclosure
damaged.
•
DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL