SkyTrac Systems Ltd.
Document Rev. 01.020
DOC0334
Page 19 of 49
Restricted Proprietary and Confidential Information
3 M
ECHANICAL
I
NSTALLATION
3.1 General
This section contains procedures for the mechanical installation of the ISAT-200 system
components. It includes unpacking instructions, a table listing the weight of each component, and
instructions for completing the physical installation of the ISAT-200, the ITRAY-200, and the TSO
Combination Antenna
.
The ISAT-200 installation package contains a combination GPS/Iridium antenna. The antenna must
be placed in a location that has a clear view of the sky. The ISAT-200 must receive GPS signals via
the antenna to enable the determination of its present position and communicate (send/transmit)
with the Iridium
®
LEO satellite system.
In order to view position data, a Windows-based PC is required at the base location. Please see
www.skytrac.ca for software options.
3.2 Unpacking and Inspecting the System Components
1. Check the items in the shipment against those listed on the shipping invoice to ensure that all
items have been received. If any items are missing, contact SkyTrac Client Services
.
2. Carefully remove each item from its individual packaging.
3. Inspect each item for damage that may have been incurred during shipping. In case it is
necessary to submit a damage claim, save the shipping container to help verify the claim.
4. After all items have been unpacked, it is suggested that you save the containers and
packaging materials in case it becomes necessary to reship an item.
Verify and record the IMEI and the serial number of the ISAT-200.
3.3 Installation Limitations
The following installation regulations must be adhered to:
The ISAT-200 must be installed using an ITRAY-200 (P/N: 102-200-01) mounted securely.
CAUTION:
As per FAA Policy, No. ASW-2001-01 dated April 25, 2002:
The antenna must not be installed 0.5 meters or less from a FADEC system
.
.
The document reference is online, please check the correspondence between the online documentation and the printed version.
