GETTING STARTED
Batteries Installation
Batteries installation of the clock
Insert new batteries into clock.
Insert 3 "C" batteries in polarity (+) and (-) as indicated.
Close the battery cover.
The low battery icon will show in the indoor temperature window when your
batteries need replacing.
Warning:
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel
cadmium) batteries.
To ensure proper functioning of your SkyScan Atomic clock, please follow this power up
procedure:
1.
Insert new batteries into clock.
2.
Slide the time zone switch on the back of the SkyScan clock to your time
zone:
PST = Pacific Standard Time
MST = Mountain Standard Time
CST = Central Standard Time
EST = Eastern Standard Time
3.
Slide the daylight savings time switch (DST) to ON. This setting allows your
clock to automatically change from standard time to daylight savings time and
back each spring and fall. If you live in an area that does not recognize
daylight savings time (Arizona and parts of Indiana) slide the DST switch to
off.
Do not touch any other buttons or settings on you SkyScan clock. It will automatically set
itself to the exact time, day, date and indoor temperature after receipt of the Atomic
Signal.
