background image

SPECIFICATIONS: 

 
Temperature measuring range 
 

   

Indoor:  +32ºF to +122ºF with 0.2ºF resolution  
             0ºC to +50ºC with 0.1ºC resolution 
             ("OF.L" displayed if outside this range) 
 
Outdoor:  -21.8ºF to +157.8ºF with 0.2ºF resolution 
                 -29.9ºC to +69.9ºC with 0.1ºC resolution 
                ("OF.L“ displayed if outside this range) 
 
Temperature checking interval 

 

 

Indoor:  every 10 seconds 
Outdoor:  every 5 minutes  
 
Transmission distance:  maximum 82 feet (25 meters) in open field, depending upon surrounding structures, 

mounting location and possible interfering sources (see www.skyscaninfo.com) for additional 
information. 

 
Power source (Alkaline batteries recommended) 

 

 

Atomic clock:  2 x AA, 1.5V batteries 
Transmitter:  2 x AA, 1.5V batteries 
Battery life:  about 12 months 
 
Dimensions (L x W x H) 

   

Atomic clock: 12.20“ x 1.18“ x 8.03“ / 310 x 30 x 204mm 
Transmitter: 1.57“ x 0.9“ x 5.04“ / 40 x 23 x 128 mm 
 

LIABILITY DISCLAIMER: 
 

 

The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any 
consequences that occur should an inaccurate reading take place. 

 

This product is only designed for use in the home or office. 

 

This product is not to be used for medical purposes or for public information. 

 

The specifications of this product may change without prior notice. 

 

This product is not a toy. Keep out of the reach of children. 

 

No part of this manual may be reproduced without written authorization of the manufacturer. 

 

WARRANTY:  
 

This product is warranted to be free of defects in manufacturing for 1 year after purchase from Sams Club. 
 
This model is discontinued and not eligible for the manufacturer’s warranty. Defective clocks should be 
returned to the place of retail purchase. 
 

BATTERY CHANGE: 
 

For best performance, batteries should be replaced at least once a year to maintain the best running accuracy. 
Ensure that the batteries used are new and the correct size.  

 

Please help in the preservation of the environment and return used batteries to an authorized 
depot. 
 

WARNING! 
 

 

Do not mix old and new batteries. 

 

Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries. 

Summary of Contents for 86722ALU










Reviews: