User Manual
v1.1.3.2022-206
SKYNAV Technology, Inc.
ADD 6F., No105, Xicheng Rd., Banqiao Dist., New Taipei City 220, Taiwan (R.O.C)
Tel:886-2-26870869 / Fax:886-2-26870096
www.skynav.com.tw / [email protected]
Made in Taiwan
What do I need?
The tracker, Rubber, VHF antenna
RECYCLABLE
PACKAGING
Software setting
Download and install the software on PC.
Connect the supplied USB cable to the AIS tracker and PC.
Open the software and choose the right
COM Port
and required
model of the device.
Plug in the data cable.
1
Turn on the AT-206.
2
Connect to PC by USB.
3
Warning
AT-206 is a fully certified Type 1 AIS Aids to Navigation buoy tracker.
This device has some optional user activated functionality which may
not be permitted in some countries. If you are in any doubt, please
check with your local authorities.
Notifications
Stay away from fire.
Do not crash by Human negligence.
AT-206 Solar Powered AIS AtoN Buoy Tracker
The tracker
Rubber
Start the AT-206 setting software.
4
Enter the MMSI, Name (17chacators) and select Interval.
6
Enter the information of your vessel or buoy.
(The blue point is the position of our tracker.)
7
If yes, Click the “Exit”.
13
Select the Encryption function and enter the encrypt code if you need.
(The encrypt code should same with your AIS transponder.)
8
Choose the right COM Port and click the “Connect”.
5
Select AIS type. (Standard is for vessel ; AtoN is for buoy ;
Older AIS is for vessel with older chartplotter it can’t receive Name of vessel.)
10
Click the “Set”.
11
Click the “Query” to check is the information set up correctly done.
12
Select the ON/OFF of night lighter.
9
Flat holder
Rod holder
Accessories (choose one)
VHF antenna
